Ten questions about how a terminal like the one being built in Brunsbuettel works.

In one sentence: What exactly is being built in Brunsbuettel?

An LNG import and distribution terminal will be built in Brunsbuettel by the end of 2026, which will make a significant contribution to Germany’s security of supply with natural gas.
 As part of the gradual phase-out of fossil fuels, the Brunsbuettel site and the infrastructure that will then be in place will also enable the continuous and future-oriented import and distribution of fossil-free forms of energy, probably hydrogen derivatives.

What does a normal day at an LNG terminal look like? What would you be able to see/observe?

The core of running a terminal is the operations department where men and women operate in 8-hour-shifts and take care of all activities 24 hour a day, 7 days a week. In particular, they are responsible for the unloading of LNG carriers, jointly with the carrier’s staff, the loading of trucks and railcars as well as for sending out gas into the pipeline connecting the terminal to the gas network in Germany.

The operations department is directly supported by the maintenance crew which ensures that all systems are running and perform safely and efficiently. During the day they maintain equipment and monitor and check on contractors which are hired for specialized jobs.

Then there are many more roles supporting the overall functioning of the terminal: the human resources department (including training), the safety department, the technical department to design and plan maintenance, the commercial department for customer liaison and the finance department.

All workflows, routines, procedures and responsibilities are described in a continuously updated Terminal Management Handbook and are part of the Safety Management System (SMS) of the terminal.

All staff is continuously being continuously provided with further training on the handling of LNG and natural gas as well as all associated safety measures. This ensures that all staff is able to utilise the latest safety technology and equipment.

In total, the terminal will employ around 70 people in various functions.

What does happen when an LNG carrier arrives at the terminal? How long does the unloading take?

Large and small LNG-Carriers will be able to berth at dedicated jetties at the terminal in Brunsbuettel. Jetty 1 will be equipped to handle most seagoing LNG carriers, up to a length (LOA) of  345 m and a LNG capacity of 267,000 m³ (so-called Qmax carriers). Jetty 2 will be able to handle the smaller bunker barges and LNG carriers up to 180 m length (LOA). Carriers from 70m (LNG-Barges) up to 170 m (e.g. LNG bunker vessel).

Whatever the size: all LNG carriers will have to notify their arrival at the terminal in advance, present their loading papers and provide an estimated time of arrival (ETA).

This is necessary to allow the terminal’s operational staff to sufficiently prepare for the berthing of an LNG carrier. The LNG is unloaded and goes via pipelines to the tanks where it is temporarily stored.

The terminal will have a maximum unloading rate of 14,000 m³/h of LNG transfer to our land-based LNG storage tanks. This means: a large ship could be unloaded in around 20 h. However, activities such as mooring, safety checks, paper works, tug assistance, ramp-up of unloading etc. will bring the entire berthing time to a figure of approx. 30 h for a large LNG carrier. Accordingly, smaller LNG carriers will have a shorter berthing time.

LNG will be re-gasified and fed into the gas grid. Excess heat from the nearby industrial community at the ChemCoast Park is available for this purpose – a significant location advantage.

The LNG is further distributed by LNG bunker ship, tank truck or even rail tank car to fuelling stations for the supply of LNG-fuelled truck or the LNG bunker ships provide ship-to-ship bunkering operations in ports in Germany and beyond.

Like the un(loading) of trucks, the (un)loading of rail tank cars are prescribed by specific written procedures and manuals. Every truck and rail tank car will be carefully controlled before being handled at the terminal.

How often will LNG carrier arrive at the terminal?

This depends on what customers will require. Generally, more than one large LNG Carrier can be handled per week. The maximum unloading rate will be 14 000 m³/h. Including the berthing and the necessary paperwork, a large carrier will take approx. 30 h to unload, smaller carriers will take correspondingly less time.

How is the LNG loaded onto trucks and rail tank cars? How many of those do you expect to arrive at the terminal?

LNG trucks operate all over Europe and increasingly also in Germany, so staff will have plenty of experience with the loading of LNG onto trucks.

Trained operators will be responsible for truck loading. Together with the truck driver they connect the hoses. The loading itself will be done by pumping LNG from the tank to the truck: this is a fully automated process with many safety precautions built into the system. The operator and the driver are always present near the filling station to supervise the loading. Once the truck is loaded, the operator and the truck driver will disconnect the hoses, print and accept the necessary paperwork and perform a last safety check before the truck leaves the terminal. Initially around 120 trucks will be loaded per day, 6 days a week.

LNG transported by rail has advantages for some customers, e.g. a lower environmental impact compared to truck transport. With the possibility for railcar loading the terminal will already be future proof. The railcar loading will work in a similar way as the truck loading operation, whereby this time the operator may be assisted by the operator of the shunting locomotive. In its initial phase, up to 120 rail cars per week can be loaded at the German LNG terminal on a 24/7 continuous basis.

So, the LNG is never out in the open?

No. In normal operations, LNG – and after regasification natural gas – is handled in a closed system at the terminal, i.e. from the LNG carrier to the LNG tanks and further on into the gas transmission system or from the LNG tanks to the individual truck-, railcar or bunker vessel loading stations.

Even the natural boil-off gas created within the terminal will be recondensed and, as such, brought back into the LNG stream. An additional existing flare would only be used for a short period during the initial start-up of the terminal and in case of unusual upsets, as an emergency measure. The German LNG Terminal can therefore be classified as an emission-free terminal.

And, how do you re-gasify the LNG?

The LNG is stored at temperatures of around -162° C and at atmospheric pressure. Under these conditions, LNG is a boiling liquid.

To speed up the process of regasification, we need to apply some indirect heat. In this context, Brunsbuettel offers an unbeatable advantage: Heating water from the nearby industrial community at the ChemCoast Park can be used for an LNG-vaporizer system with warm water on one side and cold LNG on the other side. This will result in re-gasified LNG which can be fed into the gas transmission network.

The water used to warm-up the LNG will never be in contact with the LNG and will leave the terminal as clean as it came in, but substantially colder. This cold water can then be re-used as cooling water at the neighbouring industrial area where we received it from, creating a perfect synergy.

What are your safety measures on the terminal? How is your staff protected?

All involved take the safety of terminal staff, surrounding communities, residential areas, and industrial sites very seriously. This is first priority. The LNG terminal in Brunsbuettel will use start-of-the-art safety technology and will be designed so as to minimise the impact of any accident scenario on its surroundings. This means that the design of the terminal is built according to the safety-first principle. As every terminal, work will closely be coordinated with third party responders, such as the fire departments, to develop site-specific emergency plans.

Operators and all other staff will be equipped with all appropriate protective clothing and devices and will be continuously regularly trained internally and relevant external experts in emergency response and the latest safety measures.

Please note that nothing is left to chance at the terminal. All systems are extensively tested before becoming operational. In addition, all systems have a redundancy built-in, i.e. when a machine fails, there is always a back-up available. Various dedicated handbooks elaborate all procedures at the terminal and explain and direct the staff and their actions. Detailed management systems, based on the latest insights and technological developments, keep track of performance safety. In addition, internal and external audit programs check and monitor any necessary improvements.

However, the highest priority is to avoid any accidents.

What consequences does a gas leakage have? 

The principle design, operating and maintenance structure of the terminal prevents gas from escaping. However, if a gas release occurs, this will be immediately noted as throughout the terminal there are several monitoring systems as well as gas detection systems and cameras to alert operators.

The terminal is designed as to automatically stop all operations, with emergency shut-down valves positioned to block in the leaking system and thereby minimising the potential leak. An in-built system will direct any leaked LNG to a location where it can safely evaporate.

In conclusion, highly trained staff as well as terminal-specific safety design minimizes the risk and reduces the consequences in case of an accident.

What will be done in terms of environmental and climate protection?

A number of measures are planned to minimize waste disposal, re-use materials/resources, and save energy, where possible. Gas molecules entering the terminal are all in a closed system, i.e. all incoming gas is temporarily stored before it goes out into product delivery systems, such as pipeline, trucks, or ships. State-of-the-art technologies are used and the terminal is aligned with best practices.

As part of the permit approval process detailed and site-specific plans to minimise any possible environmental impact of the terminal on local wildlife will be developed as well as the local land, plant and water environment.

And of course, LNG as fuel for the shipping and heavy goods road transport is a low-emission fuel that substantially reduces the emission of air pollutants and contribute to the reduction of greenhouse gas emissions.